Eibach 22mm Rear Anti-Roll Kit for 05-10 Mustang S197/Convertible V8 - 35101.312Find parts that fit my vehicle

Rear Bar installed on a 2008 Mustang 6 Cyl W/O a factory bar

There was some initial difficulty installing the caps on the lower ends of the links after the bushings and bar was inserted into the links. The angle of the the cap screws threading into the links makes it difficult to get them to initially thread correctly. I had to slightly open up the holes in the caps to get the screws to thread correctly into the links. Also, the diameter of the supplied upper attachment bolts is much smaller than the diameter of the holes in the body brackets and somewhat smaller than the inside diameter of the sleeves in the bushings at the top of the links. In addition, the space between the sides of the body brackets is much greater than the width of the top of the links. These tolerances allowed the links to move freely in the brackets causing loud knocking sounds from the rear of the car after the bar was installed. I used several large washers to fill the gaps between the links and the bracket sides and tightened the attachment bolts as much as possible. This eliminated most of the knocking except on very rough or uneven pavement. Unless I made some serious errors in the installation, I think Eibach should review the sizes of the hardware and components for this particular installation to eliminate the large tolerances that seem to cause the unpleasant sounds. Aside from these problems, the car handles much better with the bar installed and is much more enjoyable to drive, especially through the turns. Dave Richmond Va

Good Experience

As of the writing of this review the sway bar has been installed on my car for 2 days. Since my car didnt come from the factory with a rear sway bar, the Eibach bar makes a big difference in the car's handling. The sway bar kit came with complete installation instructions, written in clear English and contained step by step installation pictures. As a point for improvement, it would have been nice to have torque specs for the fasteners. Also, not all the washers shown in the installation pics were included in the kit. Overall I would recommend this product as it performs as advertised and was priced very competitively.