Fluke Rigid Back Probe Pins

Features and Benefits:

• Slides onto test probes measuring 2mm (0.08")
• Tested to 60 V DC
• Better than a test probe alone - these 2 IN long rigid back probe pins easily pass between the weather pack seal and wire;
• A sharp point ensures good contact to the electrical connector, and the pin's insulation protects it from shorting to other wires;
• Slides onto test probes measuring 2 MM

For use with 12 V or 42 V vehicles; Ensures good contact to the electrical connector and the pins insulation protects it from shorting to other wires; Can be used with Fluke TL71 or TL75 test lead sets.Set of one red, one black 2 inch long pins slip easily onto standard test probe tip. Rated to 60 V DC. Sharp point is designed to pass between the weather pack seal and wire.

Fluke FLUTP88

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov