ISR Performance Auto-Manual Conversion Clutch Line - Nissan 240sx 89-98 - IS-240-411

ISR Performance Auto-Manual Conversion Clutch Line - Nissan 240sx 89-98

ISR Steel braided clutch line with CNC machined fittings. Clutch lines are 52" in length. For converting your 240sx from automatic to manual transmission.

The ISR clutch line utilizes a separate fitting from the line so you don't need to keep twisting the line to install it, you just install the fitting and then the line. This is a much better design than some of the other lines out there.

ISR clutch lines are made of the finest PTFE hose and permanently crimped-on zinc plated steel fittings. Our hose is made with an extruded PTFE core and a stainless steel wire braided cover. They reduce volumetric expansion giving you the reliability and safety you demand.

Overtime and under continuous use OEM rubber lines can swell and expand causing failure. The rubber cover is also vulnerable to attacks from the ozone layer rubber which causes it to deteriorate. In extreme applications (Auto X, racing, hard driving) rubber hoses might be susceptible to flying debris. Stainless steel lines will give protection from theses issues along with enhancing the appearance of your installation.

For added protection against abrasion and corrosion this line utilizes a Yellow PVC outer cover.

Please note you do not need the smaller clutch line with this setup. This runs from Master Cylinder all the way to Slave.

** All ISR Performance Products are Designed for Off Road Use Only **

LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov