UMI Performance 82-92 GM F-Body Tunnel Mounted Trq. Arm Fits TH400- w/ Loop - Black

This torque arm set-up is designed to remove the front mounting point of the torque arm off the transmission, protecting the tail shaft from damage. This torque arm is supplied with pivot brackets that allow (2) settings to allow easy instant center adjustments. By simply moving the torque arm into the next location you can automatically change the instant center point of the vehicle. This is very crucial on low to mid horse-power cars and can easily lower 60-foot times. This set-up bolts to existing floor pan holes using 0.188" thick mild steel CNC machined mounting plates and metric grade 10.9 hardware. The complete cross brace is constructed of 0.120" thick rectangular tubing and attaches to the torque arm using 0.250" thick mild steel mounting pivot plates with Grade 8 hardware. The torque arm is attached to the supplied cross brace using an Energy Suspension polyurethane bushing set-up on both the supplied cross brace and torque arm. Polyurethane was chosen as a mounting point to keep road noise at a minimum and eliminate unwanted "clunks" found with other set-ups available. The grease-able polyurethane bushings absorb road irregularities and protect noise from entering the passenger compartment. The rear mounting points feature 0.375" thick CNC machined mounting plates and are appropriately drilled to fit your stock rear as well as aftermarket 12-Bolt and 9" Rear-end housings. This set-up requires no welding or drilling and can be installed with basic hand tools; this is a complete bolt-in design!

Suspension components are key to making sure your car is riding smoothly on or off the road. With upgraded suspension components, you can unlock the full potential of your vehicles performance.

Suspension arms connect your wheel hubs to the chassis of your vehicle. With a quality set of control arms you can fine tune your suspension and ride quality.

UMI Performance manufactures domestic vehicle suspension components that are track-tested, and street approved. With roots in precision components manufacturing, UMI Performance engineers quality into every product it produces. For over 16 years, UMI Performance has produced suspension parts in-house at its Philipsburg, PA facility with 100% U.S.-sourced raw materials. The team at UMI Performance is comprised of engineers and sales representatives that are true racers. They proudly race the products they produce and use that experience to design and further develop their products. Crucially, they have developed their product to be capable at the track and usable for daily commuting. Its product lines are also designed with installation in mind, as most components are factory replacement parts that require little to no fabrication. Any products that do require fabrication include clear step-by-step instructions to ensure enthusiasts get the most out of their vehicles.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov