UMI Performance 93-02 F-Body Front Upper A-Arm Mounts Adjustable Coil - 2335Find parts that fit my vehicle

When looking to mount a coilover to the front of your 4th generation Camaro or Firebird, look no further than UMI's new 2335 fabricated adjustable coilover a-arm mounts. The UMI upper a-arm mount is a direct bolt in upgrade that replaces the original GM mount and helps when converting to coilovers. The two stand-off tabs are angled perfectly to attach any bearing mounted coilover. Spacers are included to install coilover shocks with 1" or 1-1/4" wide bearing. UMI's product features a unique fabricated design that allows the mounts to be strong without adding any extra weight. UMI's kit is supplied with three upper a-arm adjustment holes for fine tuning the vehicles front suspension. The original factory holes are located at the center and driver has the option to raise or lower the a-arm mounting point 3/8 of an inch. Adjustment holes feature the ability to dial in the front roll center height. Raising the roll center height increases responsiveness and improves camber gain which allows a less aggressive street alignment to perform well when cornering. For street and drag applications choosing the center hole places the a-arm in the factory location. For ultimate performance use with UMI's lower a-arms P/N 2317 or 2314 to run a true bearing to bearing mounted coilover (no more t-bar). As always, these products are extensively tested on UMI's test cars in some of the harshest highway and racing environments. This makes them an excellent upgrade for the street cruiser to the road course expert.

Suspension components are key to making sure your car is riding smoothly on or off the road. With upgraded suspension components, you can unlock the full potential of your vehicles performance.

Suspension arms connect your wheel hubs to the chassis of your vehicle. With a quality set of control arms you can fine tune your suspension and ride quality.

UMI Performance manufactures domestic vehicle suspension components that are track-tested, and street approved. With roots in precision components manufacturing, UMI Performance engineers quality into every product it produces. For over 16 years, UMI Performance has produced suspension parts in-house at its Philipsburg, PA facility with 100% U.S.-sourced raw materials. The team at UMI Performance is comprised of engineers and sales representatives that are true racers. They proudly race the products they produce and use that experience to design and further develop their products. Crucially, they have developed their product to be capable at the track and usable for daily commuting. Its product lines are also designed with installation in mind, as most components are factory replacement parts that require little to no fabrication. Any products that do require fabrication include clear step-by-step instructions to ensure enthusiasts get the most out of their vehicles.