UMI Performance 93-02 F-Body Front Upper A-Arm Mounts Adjustable Factory - 2336

The UMI adjustable upper a-arm mount is a direct bolt in replacement of the original GM mount with some key improvements. The parts feature a unique fabricated design that allows for the mounts to be strong without adding any extra weight. The factory GM mount had a bowl shaped plate that was excellent at holding in water which quickly caused rust to the mount. UMI's fabricated mounts allow water to easily drain out from the strut bolt, which can extend the life of the front shocks. UMI's fabricated mounts are also supplied with several upper a-arm adjustment holes for fine tuning the vehicles front suspension. The original factory holes are located at the center and driver has the option to raise or lower the a-arm mounting point 3/8 of an inch. Adjustment holes feature the ability to dial in the front roll center height. Raising the roll center height increases responsiveness and improves camber gain which allows a less aggressive street alignment to perform well when cornering. For street and drag applications choosing the center hole places the a-arm in the factory location. As always, these products are extensively tested on UMI's test cars in some of the harshest highway and racing environments. This makes them an excellent upgrade for everyone from the street cruiser to the road course expert.

Category Description: Suspension components are key to making sure your car is riding smoothly on or off the road. With upgraded suspension components, you can unlock the full potential of your vehicles performance.

Subcategory Description: Suspension arms connect your wheel hubs to the chassis of your vehicle. With a quality set of control arms you can fine tune your suspension and ride quality.

Brand Description: UMI Performance manufactures domestic vehicle suspension components that are track-tested, and street approved. With roots in precision components manufacturing, UMI Performance engineers quality into every product it produces. For over 16 years, UMI Performance has produced suspension parts in-house at its Philipsburg, PA facility with 100% U.S.-sourced raw materials. The team at UMI Performance is comprised of engineers and sales representatives that are true racers. They proudly race the products they produce and use that experience to design and further develop their products. Crucially, they have developed their product to be capable at the track and usable for daily commuting. Its product lines are also designed with installation in mind, as most components are factory replacement parts that require little to no fabrication. Any products that do require fabrication include clear step-by-step instructions to ensure enthusiasts get the most out of their vehicles.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov