UMI Performance 08-09 Pontiac G8 10-14 Camaro Toe Rods Roto-Joint - 2521-R

UMI's rear trailing arms for the fifth generation Camaro utilize our Roto-Joint technology for a bind free performance and quiet comfortable ride quality. The Roto-Joint design is a pivot ball lined with a greaseable delrin race designed to offer 28 degrees of total unrestricted movement, more than adequate for a bind free, low friction operation. The Roto-Joint design improves performance over the factory rubber and aftermarket polyurethane bushings by allowing the suspension to articulate correctly, and provide precision handling. The installed UMI Roto-Joint allows rear end free movement when high handling, auto cross or road race is a concern while still being a 100% streetable setup. The installed delrin race, which lines the spherical ball, absorbs shock and road noise for a quiet and smooth operation on any street or track driven vehicle. The rear toe rods control the camber alignment of the rear end preventing the tire from moving inward or outward during suspension load. The factory toe rods are made from flimsy stamped steel and feature soft rubber bushings causing deflection which leads to erratic handling, poor traction and possible rear tire wear. Replacing the factory arms with heavy duty toe rods makes for a more stable suspension, improved traction and better braking. Toe rods are a direct bolt in and installation time is less than an hour using basic hand tools.

Suspension components are key to making sure your car is riding smoothly on or off the road. With upgraded suspension components, you can unlock the full potential of your vehicles performance.

Suspension arms connect your wheel hubs to the chassis of your vehicle. With a quality set of control arms you can fine tune your suspension and ride quality.

UMI Performance manufactures domestic vehicle suspension components that are track-tested, and street approved. With roots in precision components manufacturing, UMI Performance engineers quality into every product it produces. For over 16 years, UMI Performance has produced suspension parts in-house at its Philipsburg, PA facility with 100% U.S.-sourced raw materials. The team at UMI Performance is comprised of engineers and sales representatives that are true racers. They proudly race the products they produce and use that experience to design and further develop their products. Crucially, they have developed their product to be capable at the track and usable for daily commuting. Its product lines are also designed with installation in mind, as most components are factory replacement parts that require little to no fabrication. Any products that do require fabrication include clear step-by-step instructions to ensure enthusiasts get the most out of their vehicles.